Ethanol-Blended Fuel And Your Engine

Posted

(NAPSA)—The conversation around fuels, technology and con- servation can sometimes get con- fusing. It doesn’t matter if you are running a motorcycle, watercraft, snowmobile, outdoor power equipment or a car—trying to balance the need to keep your engines running well with a concern for the environment can sometimes get complicated. To help, here are somepoints to consider: For starters, remember that most gasoline contains up to 10 percent ethanol, a type of alcohol that is renewable and blended with gasoline to help reduce exhaust emissions and our dependencyon fossil fuels. However, ethanolis also a sol- vent and ethanol-blended fuels, such as E10, can remove accumu- lated fuel tank debris, which can enter the fuel system and engine. Ethanol can affect fuel system components. It contains sulfate salts that corrode fuel system metals, and its solvent properties can cause hoses and gaskets in engines to shrink or becomebrittle over time. Also, moisture is in the atmosphere and ethanol attracts moisture. If the amount of water absorbed into the fuel reaches just 0.5 percent of the total content, the ethanol/water mix can settle to the bottom of the fuel tank, where it can be ingested into an engine. This is called phase separation and it can prevent an engine from running properly oratall. Also, it’s important to remember that gasoline hasa short shelf life of about 30 to 90 days. Over time, the fuel can degrade and While there may be benefits to using fuel that contains ethanol, there are also some challenges. Some experts recommend adding a fuel stabilizer. become a contaminant. All this can lead to engine damage. How To Avoid Ethanol-Related Engine Problems The good news, according to Steve Friedrich with Yamaha Motor Corporation, U.S.A., is there are somepractical solutions. First, buy fuel from a name-brand, reputable source and alwaystry to buy from the same place. Avoid fueling when thestation is taking delivery from a tanker. Hundreds of gallons of gas dumped into the tanks will stir up sediment that can end up in yourfuel system. Finally, regularly use a fuel stabilizer and other fuel additives that are formulated to help address these ethanol-related issues, and use it with anything that runs on gas like a motorcycle or ATV, yard equipmentor cars and watercraft. For example, two new products, Fuel Med RX and Engine Med RX, have metal corrosion inhibitors that help protect engines from the effects of using fuels with ethanol. Both are sold at Yamaha dealerships nationwide. For additional information, go to www.yamalube.com.