Tips To Minimize Drywall Project Messes (NAPSA)—Whether you've hired a professional to complete your drywall installation or are a do-it-yourselfer, the mess that comes along with this type of project is all but inevitable. But it doesn’t have to be as bad as you think. There are several steps that can be taken to reduce the dust that results from installing drywall, so you’re notstill cleaning up for weeksafter the project is completed. First, mark where the construction zone begins and ends so that the mess doesn’t migrate into the rest of the home. Put up plastic sheeting in doorwaysor over vents in the area where you will be working. Move whatever belongings that you can out of the room or drape them with cloths. Also, cover the floors in and leading to and from your renovation area. Use plastic or heavy drop cloths, and tape them down if necessary. Cut your drywall and any other lumberand trim outside or in the garage if it’s cold out. This keeps as much mess as possible out of the house. You can also mix your joint compoundoutside. Sanding the joint compound, also known as the “mud”thatfills the gaps between the drywall, creates dust. A growing number of DIYers, contractors and remodelers are reducing this cloud ofairborne dust by using a new product called Sheetrock brand dust control joint compound from USG, the same company that makes Sheetrock gypsum panels. It goes on like regular joint compound but binds up fine residue during sanding to form particles that fall straight to the floor in a heavy dust instead of clouding theair. As a result, the work goes quicker andcleans upfaster. Drywall cleanup can go quicker with new Sheetrock brand dust control joint compound, which causesparticlestofall straight to the floor in a heavy dust instead of clouding theair. When sanding the drywall mud, use an open-screen sandpaper so that the dust does not build up in thegrit like it does with regular sandpaper, but instead falls out of the screen. If your mud is already smooth, you may also wet sand it with a sponge instead of dry sanding. Make sure to clean the sponge frequently. After applying tape to the wall over the joint compound, clean up any bits of tape that may have fallen on the floor during thejob. Vacuum or sweep the construc- tion area at the end of each day to control the mess. This keeps dust from being tracked into other areas of the house or from circulating in theair. By following thesetips, you can have a cleaner house during your next drywall project and lessen the disruption to your everyday life during renovation. For more information, visit www.downwithdust.com or call (800) USG-4-YOU.
